|
[Sponsors] |
[OpenFOAM] ploting velocity with averaged values in z-direction |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 11, 2012, 09:51 |
ploting velocity with averaged values in z-direction
|
#1 |
New Member
Felix Barth
Join Date: Apr 2012
Location: Karlsruhe, Germany
Posts: 1
Rep Power: 0 |
Hi everyone!
I'm currently trying to evaluate my recent LES-Simulation of the flow around a discrete roughness element. My goal is to get the velocity distribution from the wall all the way to the free stream at the top of my mesh. So far I was able to plot said distribution by using the "plot over line" filter, but this only gives me the values on that exact line. My question is: Is it somehow possible to draw a similar line on a fixed x-value from 0 < y < y_max and calculate the average in z-direction for every single cell that intersects with this line? (To clarify: I just need the average in one direction, not over a plane or the average of the whole line etc. ) I would be thankful for any advice on the subject! If it helps: I'm currently using paraView 3.12.0 Best regards, Felix |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
time averaged and resolved velocity components | raunakjung | CFX | 0 | June 9, 2017 20:23 |
UDF for reading velocity values and adding random perturbation | Jomid | Fluent UDF and Scheme Programming | 0 | October 2, 2016 00:46 |
Multiphase flow - incorrect velocity on inlet | Mike_Tom | CFX | 6 | September 29, 2016 01:27 |
Time averaged velocity in turbulent pipe flow | tsero | FLUENT | 1 | November 2, 2012 03:19 |
Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 09:11 |