|
[Sponsors] |
May 11, 2005, 09:55 |
Hi,
I am not able to take a
|
#81 |
Senior Member
Fabian Braennstroem
Join Date: Mar 2009
Posts: 407
Rep Power: 19 |
Hi,
I am not able to take a look at the results and grid with paraview/paraFoam anymore. It worked before and I don't know what I changed. If I choose the 'normal' way by the utilities-menu to postprocess the data with parafoam, paraview opens up normal, but pressing the 'accept' button it seems that paraview wants to load the data and closes the environment afterwards. OpenFoam than tells me that the 'Application parafoam (pid ...) did finish successfully', but I don't want to finish it before I can see anything... Does anybody have an idea what went wrong? Greetings! Fabian |
|
May 11, 2005, 11:13 |
Hi,
I just tested it from the
|
#82 |
Senior Member
Fabian Braennstroem
Join Date: Mar 2009
Posts: 407
Rep Power: 19 |
Hi,
I just tested it from the console with 'paraFoam OpenFOAM/fab-1.1/run/tutorials/buoyantFoam/ hotRoom' I get as error message: '/home/fab/OpenFOAM/OpenFOAM-1.1/bin/paraFoam: line 57: 7023 Segmentation fault paraview paraFoam.pvs' Does anybody understand this? Greetings! Fabian |
|
May 11, 2005, 15:32 |
Well, reading the error messag
|
#83 |
Senior Member
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,905
Rep Power: 33 |
Well, reading the error message tells me:
Segmentation fault paraview 0) try running paraview on its own (this will check the installation 1) get rid of the trailing "/" in the root entry on the command line: 'paraFoam OpenFOAM/fab-1.1/run/tutorials/buoyantFoam hotRoom' 2) Try deleting all old paraview files in the case directory and try again. Hrv
__________________
Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk |
|
May 12, 2005, 01:40 |
Hi,
thanks for the suggesti
|
#84 |
Senior Member
Fabian Braennstroem
Join Date: Mar 2009
Posts: 407
Rep Power: 19 |
Hi,
thanks for the suggestions, unfortunately it does not help... I checked paraview on his own, which works fine, got rid of the trailing '/' and deleted old paraview files. Strange! Fabian |
|
May 12, 2005, 01:56 |
Hi,
it works fine for a diffe
|
#85 |
Senior Member
Fabian Braennstroem
Join Date: Mar 2009
Posts: 407
Rep Power: 19 |
Hi,
it works fine for a different problem 'turboFoam cavity'; from command line and gui Fabian |
|
May 12, 2005, 02:48 |
Your probably have NaN-s or si
|
#86 |
Senior Member
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,905
Rep Power: 33 |
Your probably have NaN-s or similar garbage in one of your result files. I have seen this before.
Hrv
__________________
Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk |
|
May 12, 2005, 06:54 |
Yes, I have some NaN-s...
T
|
#87 |
Senior Member
Fabian Braennstroem
Join Date: Mar 2009
Posts: 407
Rep Power: 19 |
Yes, I have some NaN-s...
Thanks. Fabian |
|
May 12, 2005, 06:55 |
:-) Nans are good in an Indian
|
#88 |
Senior Member
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,905
Rep Power: 33 |
:-) Nans are good in an Indian restaurant, but not in a CFD solution... I hope all will be wlel when you get rid of them.
Enjoy, Hrv
__________________
Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk |
|
May 12, 2005, 06:55 |
:-) Nans are good in an Indian
|
#89 |
Senior Member
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,905
Rep Power: 33 |
:-) Nans are good in an Indian restaurant, but not in a CFD solution... I hope all will be well when you get rid of them.
Enjoy, Hrv
__________________
Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk |
|
May 18, 2005, 03:31 |
Hi all,
Does anybody know i
|
#90 |
Member
Ervin Adorean
Join Date: Mar 2009
Posts: 76
Rep Power: 17 |
Hi all,
Does anybody know if it is possible to mirror the geometry in Paraview; if yes, how? Thanks Ervin |
|
May 18, 2005, 03:44 |
Filter->Reflection
(have ne
|
#91 |
Senior Member
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 26 |
Filter->Reflection
(have never tried it though) Or use OpenFOAM utility mirrorMesh to build a symmetric mesh (not sure if it does fields as well) |
|
May 18, 2005, 04:04 |
Thanks Mattijs,
It did work
|
#92 |
Member
Ervin Adorean
Join Date: Mar 2009
Posts: 76
Rep Power: 17 |
Thanks Mattijs,
It did work with Filter -> Reflection |
|
July 14, 2005, 09:35 |
Hi All,
I have been trying
|
#93 |
Guest
Posts: n/a
|
Hi All,
I have been trying to do the lid-driven cavity flow tutorial.Post-processing with paraFoam shows the following error: [kanishka@fedora1 ~]$ paraFoam $FOAM_RUN/tutorials/icoFoam cavity ErrorMessage # Error or warning: ERROR: In /home/amy/ParaViewReleaseRoot/paraview-2.0.2/Utilities/VTKClientServer/vtkClient ServerInterpreter.cxx, line 882 vtkClientServerInterpreter (0x8973a48): Cannot load module "PVFoamReader" from "/home/kanishka/OpenFOAM/OpenFOAM-1.1/lib/linuxOpt/libPVFoamReader.so". ERROR: In /home/amy/ParaViewReleaseRoot/paraview-2.0.2/Utilities/VTKClientServer/vtkClient ServerInterpreter.cxx, line 886 vtkClientServerInterpreter (0x8973a48): /home/kanishka/OpenFOAM/OpenFOAM-1.1/lib/linuxOpt/libPVFoamReader.so: undefined symbol: _ZN9vtkObject8RegisterEP13vtkObjectBase ERROR: In /home/amy/ParaViewReleaseRoot/paraview-2.0.2/GUI/Client/vtkPVXMLPackageParser.cx x, line 675 vtkPVXMLPackageParser (0x9116ab0): Error loading Library component PVFoamReader ErrorMessage end /home/kanishka/OpenFOAM/OpenFOAM-1.1/bin/paraFoam: line 57: 4039 Segmentation fault paraview paraFoam.pvs [kanishka@fedora1 ~]$ ...in this the ParaFoam window shuts down as soon as it opens up! Although there is no such problem with paraview which i had separately installed after downloading it from paraview.org. Any ideas???can this problem be sorted out by some means...Do i install OpenFoam to the system again? Cheers Kanishka |
|
July 14, 2005, 09:42 |
The PVFoamReader is compiled f
|
#94 |
Senior Member
Join Date: Mar 2009
Posts: 854
Rep Power: 22 |
The PVFoamReader is compiled for ParaView-1.8.5 not for ParaView-2.0.2. Your options are:
1) install the ParaView-1.8.5 we supply with OpenFOAM-1.1 2) recompile PVFoamReader for ParaView-2.0.2 (but it probably won't work due to changes in ParaView) 3) use the foamToVTK converter and run paraview rather than paraFoam. |
|
July 27, 2005, 11:35 |
Hi,
I want to do parts of my
|
#95 |
Member
Rolando Maier
Join Date: Mar 2009
Posts: 89
Rep Power: 17 |
Hi,
I want to do parts of my postprocessing on a windows machine. I installed a binary version of "paraview" there. I intend to convert my simulation data into VTK format with "foamToVTK", put it on my windows machine and doing the visualization. Will it be identical to calling "paraFoam" with the corresponding case? Rolando |
|
July 27, 2005, 12:24 |
Hi Henry,
Please tell me ho
|
#96 |
Guest
Posts: n/a
|
Hi Henry,
Please tell me how to install ParaView-1.8.5 over ParaView-2.0.2.I am struggling with 'rpm -e' command to do so,not having much knowledge of commandline interface.How to use 'foamToVTK' converter? And how to do post-processing with dxFoam. 'dxFoam postFoam' shows the following message: Executing: /home/kanishka/OpenFOAM/OpenFOAM-1.1/.bashrc Executing: /home/kanishka/OpenFOAM/OpenFOAM-1.1/.OpenFOAM-1.1/apps/dxFoam/bashrcExecuting: /home/kanishka/OpenFOAM/OpenFOAM-1.1/.OpenFOAM-1.1/apps/ensightFoam/bashrc Executing: /home/kanishka/OpenFOAM/OpenFOAM-1.1/.OpenFOAM-1.1/apps/paraview/bashrc [kanishka@fedora1 ~]$ dxFoam postFoam Checking path to dx ... Checking path to dxFoamExec executable ... Can't find dxFoamExec executable. Please check your path. I have downloaded the installer files of OpenDX from http://www.opendx.org/dlBinary.php While installing it shows: [kanishka@fedora1 ~]$ rpm -Uvh opendx-4.3.2-1.rh9.rpm error: can't create transaction lock how to install and work with it?? ..please suggest something. Kanishka |
|
July 27, 2005, 15:30 |
To install ParaView-1.8.5 avai
|
#97 |
Senior Member
Join Date: Mar 2009
Posts: 854
Rep Power: 22 |
To install ParaView-1.8.5 available from the OpenFOAM download site follow the instructions supplied.
Use foamToVTK in the same manner as all the other OpenFOAM utilities. Usage is described in the documentation. dxFoam is no longer supported. |
|
August 27, 2005, 18:37 |
I am trying to use foamToVTK o
|
#98 |
New Member
Ales Alajbegovic
Join Date: Mar 2009
Posts: 3
Rep Power: 17 |
I am trying to use foamToVTK on the buoyantFoam case. I get the error shown below when using it after the simulation. What do I have to do?
Time constant volScalarFields : volVectorFields : pointScalarFields : pointVectorFields : Internal : "/home/ales/OpenFOAM/ales-1.2/run/tutorials/buoyantFoam/hotRoom/VTK/hotRoom_0.vt k" Original cells:4000 points:4851 Additional cells:0 additional points:0 Patch : "/home/ales/OpenFOAM/ales-1.2/run/tutorials/buoyantFoam/hotRoom/VTK/floor/floor_ 0.vtk" Patch : "/home/ales/OpenFOAM/ales-1.2/run/tutorials/buoyantFoam/hotRoom/VTK/ceiling/ceil ing_0.vtk" Patch : "/home/ales/OpenFOAM/ales-1.2/run/tutorials/buoyantFoam/hotRoom/VTK/fixedWalls/f ixedWalls_0.vtk" Time 0 --> FOAM FATAL IO ERROR : Cannot find 'value' entry which is required to set the values of the default patch field. Please add the 'value' entry to the write function of the user-defined boundary-condition or link the boundary-condition into libfoamUtil.so file: /home/ales/OpenFOAM/ales-1.2/run/tutorials/buoyantFoam/hotRoom/0/p::floor from line 34 to line 34. From function defaultFvPatchField<type>::defaultFvPatchField(con st fvPatch&, const Field<type>&, const dictionary&) in file fields/fvPatchFields/basicFvPatchFields/default/defaultFvPatchField.C at line 127. FOAM exiting |
|
August 27, 2005, 18:47 |
Bug in tutorial setup, maybe a
|
#99 |
Senior Member
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,905
Rep Power: 33 |
Bug in tutorial setup, maybe also in FoamX config, but I'm not checking. Edit the file:
OpenFOAM-1.2/tutorials/buoyantFoam/hotRoom/0/p and for all patches of type wallBuoyantPressure add the "default" value for post-processing, e.g.: floor { type wallBuoyantPressure; value uniform 100000; } Hrv
__________________
Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk |
|
November 16, 2005, 13:50 |
Dear all:
I have a VTK file
|
#100 |
Senior Member
Guoxiang
Join Date: Mar 2009
Posts: 109
Rep Power: 17 |
Dear all:
I have a VTK file in which includes the MESH and Geometry. But I do not know how to import to openfoam or how to use this VTK file in openfoam. Could you help me. Thanks deeply, Guoxiang |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[OpenFOAM] Paraview problem: loading the VTK cellSets changes the time | anon_q | ParaView | 1 | November 3, 2018 20:53 |
[General] How to relate tensor data in vtk file to Paraview | awa5114 | ParaView | 0 | March 7, 2017 04:56 |
[General] Creating VTK image compatible to Paraview Visualizer | het | ParaView | 0 | January 7, 2016 08:20 |
[OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12 | keepfit | ParaView | 60 | September 18, 2013 03:23 |
[General] paraview ignores SPACING in STRUCTURED_POINTS vtk data? | jaffar | ParaView | 0 | November 27, 2012 09:36 |