|
[Sponsors] |
August 9, 2007, 05:40 |
hallo philippose,
i want to
|
#21 |
Guest
Posts: n/a
|
hallo philippose,
i want to zip up the entire 'cavity'. can you give me the detailed command? For the linux command system i know a little. thank you very much. good wishes alice |
|
August 9, 2007, 11:20 |
goto
/home/username/OpenFO
|
#22 |
Senior Member
Srinath Madhavan (a.k.a pUl|)
Join Date: Mar 2009
Location: Edmonton, AB, Canada
Posts: 703
Rep Power: 21 |
goto
/home/username/OpenFOAM/username-1.4/run/tutorials/icoFoam and run the folowing command: tar -czvf cavity.tar.gz ./cavity |
|
August 10, 2007, 13:29 |
Hello and a good evening :-)!
|
#23 |
Senior Member
Philippose Rajan
Join Date: Mar 2009
Location: Germany
Posts: 552
Rep Power: 25 |
Hello and a good evening :-)!
Were you able to zip up the "cavity" case with the help of the command that Srinath suggested? Or have you solved the problem yourself :-)!? Have a nice weekend! Philippose |
|
September 28, 2007, 10:09 |
Hello to everyone!
I have t
|
#24 |
Member
Michele Vascellari
Join Date: Mar 2009
Posts: 70
Rep Power: 17 |
Hello to everyone!
I have the same trouble with mesh visualization with OpenFoam. I'm using version 1.4.1, with paraview 2.4.4, with local version of gcc (4.2.1). When I select wireframe rapresentation from display style, I can not visualize the computational grid. The strange thing is that also using the new paraview (version 3.0.2), I've the same problem! The more strange thing is that using the same case with a different PC (running a different distro, Archlinux instead of Debian) I visualizen correctly the mesh. Michele |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
[Other] conformed FSI mesh for unstructured fluid region | ashish.svm | OpenFOAM Meshing & Mesh Conversion | 10 | August 2, 2019 08:40 |
Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
[ICEM] surface mesh merging problem | everest | ANSYS Meshing & Geometry | 44 | April 14, 2016 06:41 |
[ICEM] Problem making structural mesh on a surface | froztbear | ANSYS Meshing & Geometry | 1 | November 10, 2011 08:52 |