|
[Sponsors] |
|
January 18, 2001, 07:24 |
RE:Serious Problem
|
#1 |
Guest
Posts: n/a
|
In VR environmental of PHOENICS 3.3 version for WINDOWS98 and WINNT, when I use OPEN FILE FOR EDITING to edit Q1 file with PIL, then run earth or save as a case, user-defined commenting, variable definition, and parameterization of Q1 are completely lost, It not only cause the error in next running, but also bring us into the trouble because of poor readability and reusability. How can we overcome the problem in VR, please CHAM gives your answer. Thank you!
|
|
January 18, 2001, 09:09 |
Re: RE:Serious Problem
|
#2 |
Guest
Posts: n/a
|
Hi, I'm not from Cham but I had the same problem /in V3.2/ I found that way: -run Satellite -run VR-Editor from Commander without closing Sat -now the changes in Q1 occurs and could be saved /e.g. as a case/ but still - I can't run Earth with my example /error:GROUND called but no initial value set! INDVAR = 149 Group No= 11 Sectn No= 1 Patch NAME in INDATA=INIMARK /-maybe it is another story...
God luck! MM |
|
January 19, 2001, 07:25 |
Re: RE:Serious Problem
|
#3 |
Guest
Posts: n/a
|
Yes i also do the same. But there is another way to modify the Q1 file in V3.2. Run phoenics, do the changes in Q1, exit from VR-editor(i.e exit from phoenics) without saving VR settings to Q1 and generating EARDAT file, then you again run phoenics and run EARTH to see your changes get effected.
The error you find in RESULT file is due to the mistakes in intialisation. The mistakes could be mismatch between the patch(INIMARK) defined in Q1 and GROUND file or could be in GROUND coding alone. Hope this helps. Good Luck. Dipak |
|
February 4, 2001, 06:39 |
Re: RE:Serious Problem
|
#4 |
Guest
Posts: n/a
|
Thank you for your kind help! I have tried your suggested means, but when I save a case by using SAVE AS A CASE of FILE after Q1 file is edited in PIL and open the just saved existing case, It is found that the variable define, commenting and some commands is completely lost.Althrough I have referenced the library cases(most library case is provided with Q1 edited by PIL) , I really don't know where the problem is. Could you give me some advice?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
VOF diffuse problem on two fluids problem | Fang Jin | FLUENT | 5 | February 17, 2011 05:38 |
Problem in Modelling Heat Transfer Problem | Deepak R | FLUENT | 1 | December 6, 2007 09:37 |
Problem in cavity flow problem | saad | Main CFD Forum | 4 | November 1, 2007 07:45 |
natural convection problem for a CHT problem | Se-Hee | CFX | 2 | June 10, 2007 06:29 |
problem in solving "wave generation" problem | san | FLUENT | 2 | April 3, 2006 23:37 |