CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Phoenics

casting problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 28, 2004, 06:18
Default casting problem
  #1
ramesh
Guest
 
Posts: n/a
Dear friends, during solidification of molten metal , some latent heat is evolved and please tell me how can we incorporate the latent heat term during the pahase change of solidification process.please help me. with regards Ramesh
  Reply With Quote

Old   September 29, 2004, 18:54
Default Re: casting problem
  #2
Carlos
Guest
 
Posts: n/a
Ramesh,

Do you know the paper from Prakash that developed and used a model for metal solidification? Even better, he did it using PHOENICS...
  Reply With Quote

Old   September 30, 2004, 01:02
Default Re: casting problem
  #3
ramesh
Guest
 
Posts: n/a
Dear Carlos, can you send me the paper which contains the solidification problem , or can you give me the journal name and year of publication? as you know it will help me grately . regards ramesh
  Reply With Quote

Old   October 13, 2004, 21:35
Default Re: casting problem
  #4
Carlos
Guest
 
Posts: n/a
Voller and Prakash did a work using PHOENICS. It has been published in PHOENICS JOURNAL (code included). You may order it via CHAM site (www.cham.co.uk). Ask for a paper written by these two. There will be no mistake.

However you may also have some interest in their paper in http://www.ias.ac.in/sadhana/Pdf2001FebApr/pe932.pdf

Good luck!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CENTRIFUGAL CASTING amp Main CFD Forum 1 June 16, 2008 11:29
Urgent help on Sand casting problem arunprasad FLUENT 0 April 18, 2004 06:04
die casting, help me paolo FLUENT 0 October 12, 2003 06:53
desperate for help on a benchmark casting problem prashanth FLUENT 0 July 18, 2003 01:31
fluent bench mark casting problem prashanth FLUENT 0 July 17, 2003 03:35


All times are GMT -4. The time now is 00:19.