|
[Sponsors] |
February 19, 2008, 10:00 |
IMMERSOL and solar radiation
|
#1 |
Guest
Posts: n/a
|
Hi
I am trying to simulate solar radiation over a complex geometry. I thoight that a radiative plate at the domain's boundary would be a good solution. I used the Immersol model and added the following lines at group 13: PATCH (IMSW... ,HWALL ,0,500,0,500,80,80,1,1) COVAL (IMSW... ,T3 , GRND4 , GRND5 ) and the following at group 19: SPEDAT(SET,EXTRN_QEXT,SUN,R,8.00000E+01) to represent the fixed flux of 800 W/m2. I get crazy temperatures though. Anyone with experience in IMMERSOL? BEST REGARDS, st |
|
May 11, 2008, 05:18 |
Re: IMMERSOL and solar radiation
|
#2 |
Guest
Posts: n/a
|
Hello Now I used comercial Code for CFD, CFDRC , So I used solar radiation but I don't known how to check the accurate result If you try this soft ware May be can solve your problem.
Best Regards Ton |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
solar radiation | Arnold | FLUENT | 0 | May 2, 2006 21:00 |
CONVERGANCE IN IMMERSOL RADIATION MODEL | anjani | Phoenics | 9 | February 21, 2006 08:45 |
solar radiation | gb | FLUENT | 1 | December 22, 2005 03:16 |
solar radiation | guang ai | Siemens | 0 | October 15, 2002 11:25 |
solar radiation | raymond | Siemens | 2 | February 3, 2002 22:14 |