CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Phoenics

Air flow inside infant incubator housing...help!!!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 30, 2008, 22:24
Default Air flow inside infant incubator housing...help!!!
  #1
Danny Ditroia
Guest
 
Posts: n/a
Hi there, I am currently studying in my final year at University and my final year project involves simulating the air flow inside the housing of a new baby incubator I have designed. I have been informed CFD is the best way to achieve this and after spending the last week attempting to work out how to use PHOENICS I am turning to you in need of some help! I need to simulate two basic air flow models, one is a standard shaped incubator housing (rectangular box) and the other is my new hemispherical (dome) shaped incubator housing. They both simply need 4 inlet vents and 4 outlet vents with hot air blowing through the inlets. I have picked up a very basic understanding of the programs workings but would much appreciate it if somebody could either post on here how they would go about this or kindly call me to explain My mobile is 07877925367 and if anybody is located near Brighton I would be willing to pay them for a short consultancy session in order for me to get this done, it is very important I get this finished in the next week! Many thanks, Danny.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fan in a housing Holger CFX 0 December 18, 2008 03:58
[Technical] Flow inside a valve danvica OpenFOAM Meshing & Mesh Conversion 0 December 9, 2007 12:04
Help with fluid analysis on 3rd world incubator project michaelbrooks OpenFOAM Running, Solving & CFD 2 July 16, 2007 00:48
incubator model SOFIE CFX 3 February 28, 2002 05:12
Environmental simulation of a livestock housing Emmauel Mutai Main CFD Forum 1 September 27, 2001 10:16


All times are GMT -4. The time now is 21:16.