|
[Sponsors] |
Assemble special fails - symmetry plane not being created |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 7, 2015, 08:01 |
Assemble special fails - symmetry plane not being created
|
#1 |
Senior Member
Lefteris
Join Date: Oct 2011
Location: UK
Posts: 337
Rep Power: 15 |
Hi all,
I'm using Pointwise v17.3 R4 and I notice some very strange behaviour. I'm trying to create the symmetry plane but the assemble special command fails miserably. I select the outer connectors (farfield), I save the edge, then I select the interior nodes taking care that their orientation is opposite to that of the outer connectors. I save the edge, click ok and I get nothing. By nothing I mean that the domain is empty and the message I get is this: Warning: Aniso mesh refinement failed during domain initialization. Check dom-24. Info: Created 1 domain. So the domain is allegedly created but it's not initialised. When I try to initialise it I get this error message: Warning: Aniso mesh refinement failed during domain initialization. Check dom-24. Error: Could not run solver. I have another saved pw file which is the same with the one I'm currently working but the surface mesh is more dense. In fact, I just coarsened the same mesh and saved it as a different file (after deleting the symmetry plane domain). So, I really don't understand what is going on. Why is Pointwise denying to create the symmetry plane domain? Thanks for your help!!! Lefteris
__________________
Lefteris |
|
April 10, 2018, 03:08 |
|
#2 |
New Member
Tim Jim
Join Date: Sep 2017
Posts: 25
Rep Power: 8 |
Hi Lefteris,
Did you ever figure out what was causing this? I'm having the same issue! Thanks and regards, Tim |
|
April 10, 2018, 03:09 |
|
#3 |
New Member
Tim Jim
Join Date: Sep 2017
Posts: 25
Rep Power: 8 |
Hi Lefteris,
Did you ever figure out what was causing this? I'm having the same issue! Thanks and regards, Tim |
|
April 11, 2018, 09:48 |
|
#4 |
Senior Member
David Garlisch
Join Date: Jan 2013
Location: Fidelity Pointwise, Cadence Design Systems (Fort Worth, Texas Office)
Posts: 307
Rep Power: 14 |
Please read this and then start a new thread. Attaching pictures and/or actual pw files to your NEW thread would be most helpful.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[blockMesh] Getting error message: "Fatal error Symmetry plane 'sides' is not planar" | Ron de Vos | OpenFOAM Meshing & Mesh Conversion | 5 | December 21, 2019 11:07 |
Regarding FoamX running Kindly help out | hariya03 | OpenFOAM Pre-Processing | 0 | April 18, 2008 04:26 |
Symmetry plane error in solver | Santiago Orrego. | CFX | 6 | January 31, 2007 07:09 |
ICEM and symmetry plane | Roland | CFX | 3 | September 13, 2006 08:38 |
CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |