|
[Sponsors] |
April 12, 2016, 03:04 |
Pointwise Unstructured Meshes: PISOFOAM
|
#1 |
New Member
Ranjan
Join Date: Apr 2014
Posts: 29
Rep Power: 12 |
Hello
I have a question of a very general nature. I intend to use kkl-Omega transition model for studying flow transition over wing geometries at low Reynolds number. I already have the steady state results using Pointwise mesh. However, the unstructured mesh from Pointwise doesn't seem to work using PISO Algorithm. Thank you in advance for the time and patience. |
|
June 17, 2016, 15:53 |
New model
|
#2 |
Member
Alberto
Join Date: Sep 2013
Posts: 37
Rep Power: 12 |
Just an advise, there is a new model (the k-v2-omega), a new version of the k-kl-omega model. You should use this one if you want be update.
here is the paper: Maurin Lopez. D. K. Walters. “Prediction of transitional and fully turbulent free shear flows using an alternative to the laminar kinetic energy approach”. Journal of Turbulence, Vol 17, Iss. 3, 2016. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Weird results on Cavity and unstructured meshes | x86_64leon | OpenFOAM Running, Solving & CFD | 12 | March 1, 2016 19:44 |
coefficient calculation (a_P, a_nb) in unstructured meshes vs. structured meshes(FVM) | t.teschner | Main CFD Forum | 2 | January 15, 2015 12:10 |
generating OpenFOAM meshes with pointwise | robo | OpenFOAM Pre-Processing | 1 | April 29, 2014 13:47 |
Velocity/pressure/Temperature blow-up while dealing with unstructured meshes | psosnows | OpenFOAM Bugs | 4 | October 19, 2011 15:48 |
Merge 2 unstructured meshes | vinc | ANSYS Meshing & Geometry | 0 | May 19, 2011 16:14 |