 |
 |
 |
|
|
|
[Sponsors] | ||||
July 7, 2021, 08:24
|
Specify mooring line configuration
|
#1 |
|
New Member
Xing Lv
Join Date: May 2021
Posts: 11
Rep Power: 4  |
Hi Team REEF3D,
I tried to build a mooring model and set mooring lines with the parameters in X 311, but the calculation result was not what I wanted, I used Paraview to see the mooring lines in a different mounting position and shape than in my file. This could be due to I omitted or incorrectly set some options in ctrl.txt. I would like to ask for some help in how to improve the numerical model of moorings. Thanks in advance, Best regards |
|
|
|
|
|
July 10, 2021, 03:56
|
|
#2 |
|
New Member
Join Date: Mar 2021
Posts: 8
Rep Power: 5 |
Hi,
I would recommend using X 310 2. This approach is more flexible and provides a solution for any input. Let me know if you need further assistance. Kind regards, Tobias |
|
|
|
|
|
|
July 11, 2021, 13:32
|
|
#3 |
|
New Member
Xing Lv
Join Date: May 2021
Posts: 11
Rep Power: 4 |
Hi Tobias,
Thank you for your reply. I rerun the program after changing the parameters in the X 310 option, but the result is still unsatisfactory. I also tried to increase the number of grids, the movement of the floating body in the numerical wave tank deviated from the experimental situation, so I may have to re-establish the simulation model. It would be best if there were a relevant tutorial. Best regards, Xing Lv |
|
|
|
|
|
|
August 9, 2021, 05:08
|
|
#4 |
|
New Member
Join Date: Mar 2021
Posts: 8
Rep Power: 5 |
Hi,
could you please provide me the control files so that I can check your setup. Generally, there are many parameters which influence the quality of the results. This is not just do to your numerical setup in REEF3D... Kind regards, Tobias |
|
|
|
|
|
|
August 25, 2021, 10:48
|
|
#5 |
|
New Member
Xing Lv
Join Date: May 2021
Posts: 11
Rep Power: 4 |
Hi Tobias,
Thank you for your reply. I have changed some parameters, and the simulation results are more consistent with the actual motion. In addition, I would like to know whether the coupling calculation of current and wave simulation of 6DOF floating body with mooring can be realized in REEF3D. Best regards |
|
|
|
|
|
|
August 30, 2021, 04:01
|
|
#6 |
|
New Member
Join Date: Mar 2021
Posts: 8
Rep Power: 5 |
In general, REEF3D is able to simulate wave+current conditions. There is no limitation for floating bodies.
Though, I haven't used this combination yet. Regards, Tobias |
|
|
|
|
|
|
August 9, 2022, 13:56
|
|
#7 | |
|
New Member
Weather
Join Date: Apr 2014
Posts: 9
Rep Power: 12 |
Quote:
|
||
|
|
|
||
|
June 14, 2023, 06:41
|
|
#8 |
|
New Member
anonymous
Join Date: Jun 2023
Posts: 1
Rep Power: 0 |
Hello ,can u send the ctrl.txt and control.txt final files please?please help us
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Gmsh] Structured meshing in Gmsh | the_phew | OpenFOAM Meshing & Mesh Conversion | 19 | August 24, 2022 03:19 |
| problem during mpi in server: expected Scalar, found on line 0 the word 'nan' | muth | OpenFOAM Running, Solving & CFD | 3 | August 27, 2018 04:18 |
| [OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12 | keepfit | ParaView | 60 | September 18, 2013 03:23 |
| [blockMesh] non-orthogonal faces and incorrect orientation? | nennbs | OpenFOAM Meshing & Mesh Conversion | 7 | April 17, 2013 05:42 |
| Problems of Duns Codes! | Martin J | Main CFD Forum | 8 | August 14, 2003 23:19 |
Linear Mode
