Problem with K w turblence model, however LES is showing scour accurately

lalit007 · July 18, 2022, 07:19

Respected Sir,
i am working with sediment transport around complex structure. When I have using The K-w model the place of scour is different and un accurate. However with the same parameter using the LES turbulence model, the scour is showing at accurate position and scour depth are also accurate.

Kindly help I have to incorporate K w model. because there is no study using LES turbulence model using REEF3D

Thank you

kamath · August 3, 2022, 08:57

That is interesting.

Have you used the same grids for the k-w and LES based simulations?
Strictly speaking, LES will demand a more refined grid and can already be a reason for an improved result.

There should not be anything that stops you from using the LES model in REEF3D to simulate a benchmark case for sediment transport?

lalit007 · August 4, 2022, 00:48

Dear Sir,
Thank you for the reply. I have checked the grid size, it's similar in both the turbulence model. I have gone through your recent publication named Large-eddy simulations of gravity currents in the presence of waves. Now, I am incorporating the LES Turbulence model for this study. Thank you, sir for your valuable suggestion.

Thanks

July 18, 2022, 07:19	Problem with K w turblence model, however LES is showing scour accurately	#1
lalit007 New Member Lalit Kumar Join Date: Nov 2021 Location: IIT Kharagpur Posts: 4 Rep Power: 4	Respected Sir, i am working with sediment transport around complex structure. When I have using The K-w model the place of scour is different and un accurate. However with the same parameter using the LES turbulence model, the scour is showing at accurate position and scour depth are also accurate. Kindly help I have to incorporate K w model. because there is no study using LES turbulence model using REEF3D Thank you

August 3, 2022, 08:57		#2
kamath Senior Member Arun Kamath Join Date: Nov 2014 Location: Trondheim, Norway Posts: 265 Rep Power: 13	That is interesting. Have you used the same grids for the k-w and LES based simulations? Strictly speaking, LES will demand a more refined grid and can already be a reason for an improved result. There should not be anything that stops you from using the LES model in REEF3D to simulate a benchmark case for sediment transport? __________________ Arun X years with REEF3D

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Smagorinsky Problem - LES - Internal pipe flow	gu1	OpenFOAM Running, Solving & CFD	2	December 29, 2017 17:54
Implement an les turbulence model	pante	OpenFOAM Programming & Development	19	December 5, 2014 16:16
Water subcooled boiling	Attesz	CFX	7	January 5, 2013 03:32
Implementation of wall model to LES	saeedi	Main CFD Forum	3	August 24, 2012 14:51
LES model (oneEqEddy), air entrainment predictions	N. A.	OpenFOAM	1	November 7, 2010 13:17

August 4, 2022, 00:48		#3
lalit007 New Member Lalit Kumar Join Date: Nov 2021 Location: IIT Kharagpur Posts: 4 Rep Power: 4	Dear Sir, Thank you for the reply. I have checked the grid size, it's similar in both the turbulence model. I have gone through your recent publication named Large-eddy simulations of gravity currents in the presence of waves. Now, I am incorporating the LES Turbulence model for this study. Thank you, sir for your valuable suggestion. Thanks