|
[Sponsors] |
October 14, 2023, 01:33 |
water entry problem
|
#1 |
New Member
JamesMarine
Join Date: Feb 2020
Posts: 6
Rep Power: 6 |
can reef3d be used to simulate water entry problem?
|
|
October 17, 2023, 10:40 |
|
#2 |
Super Moderator
Widar W Wang
Join Date: Mar 2016
Location: Norway
Posts: 15
Rep Power: 11 |
Hi,
Yes REEF3D can be used for water entry problems. The falling object's material property, degree of freedom and geometry can be defined using X * commands, see the user manual. For example, X 10 1 turns on 6DOF algorithms, the initial degree of freedom can be defined using X 11, material destiny by X 21, and a falling wedge can be defined using X 163. Bests, Widar |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Multiphase euler foam problem with velocity vector | enthusiast | OpenFOAM Running, Solving & CFD | 1 | January 20, 2023 03:54 |
Problem when simulating water flow for a spillway | saugatshr4 | Main CFD Forum | 0 | March 9, 2022 06:18 |
problem with two phase flow (air injected in water) | miles_davis | OpenFOAM | 15 | March 31, 2021 09:36 |
[waves2Foam] Problem of deep water simulation(wavelength become larger as propagation) | jessica_ict | OpenFOAM Community Contributions | 3 | March 6, 2019 02:21 |
Simulation Water and Oil URGENT problem | alexandrelp | CFX | 3 | May 5, 2014 21:20 |