CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

NX advanced flow simulation - jet stream boundary mesh issue

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 21, 2018, 00:21
Default NX advanced flow simulation - jet stream boundary mesh issue
  #1
New Member
 
Join Date: Mar 2018
Posts: 1
Rep Power: 0
henry_cfd_questions is on a distinguished road
Hello every one, I have recently tried to use NX flow to model a flow jet stream blowing with 23 m/s speed normal on a hot plate, the goal is to cool down the plate. The problem came up when I noticed the finer the mesh is, the temperature of the plate drops more and I thought there should be a bottom line to this but there is not, I can go above 10 million elements and the temperatures of the plate will be lower, I know it is using wall function method for boundary layer and y+ is lower than 15 with coarse mesh, the finer the mesh get, the y+ is lower, should I mesh the boundary layer ? NX doesn't do that unless you get a special license, has anyone ever used this flow modeling tool ? any ideas for my problem are appreciate. 😊

By the way the solver is Maya. but mesher is using NASTRAN mesher for flow models.
henry_cfd_questions is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
My radial inflow turbine Abo Anas CFX 27 May 11, 2018 02:44
Wind turbine simulation Saturn CFX 57 February 6, 2018 06:09
Centrifugal fan-reverse flow in outlet lesds to a mass in flow field xiexing CFX 3 March 29, 2017 11:00
An error has occurred in cfx5solve: volo87 CFX 5 June 14, 2013 18:44
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 14:36.