CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

Gambit mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   December 12, 2002, 14:59
Default Gambit mesh
Posts: n/a

My mesh was created in Gambit. Boundary conditions are set and mesh was exported as generic type (*.neu).

After loading this file in STAR-CD 3.15 I have all mesh but without boundary conditions creted in gambit.

Is STAR able to recognize BC defined by gambit?

Any advice will be very helpful.

  Reply With Quote

Old   December 13, 2002, 10:58
Default Re: Gambit mesh
CJ Tune
Posts: n/a
Can Fluent export its mesh to the CGNS format? Maybe you can try that instead.

Another possibility is that the b/c's are there but have not been assigned to their own regions. I had this problem once importing a mesh from an older STAR-CD. Normally b/c's are coloured according to their type but will be white if unassigned. BSET ALL$BDIS ON, then turn on number plotting for boundaries and REPL.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help to mesh in Gambit please Nicolás FLUENT 6 September 26, 2007 14:07
mesh in gambit madhuri FLUENT 0 May 18, 2007 12:57
mesh in gambit yaron FLUENT 1 June 16, 2004 01:20
mesh in gambit yaron FLUENT 1 June 14, 2004 00:35
mesh in gambit Jack FLUENT 5 March 4, 2003 06:40

All times are GMT -4. The time now is 17:40.