CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   March 10, 2004, 10:22
Default Combustion
Julie Polyakh
Posts: n/a

Please explain to me how do you understand the meaning of the following: "to associate the chemical scheme with the fluid material"


  Reply With Quote

Old   March 10, 2004, 10:41
Default Re: Combustion
Posts: n/a
In order to specify your problem completely, you have to say that reaction scheme X takes place in fluid stream (material) Y. You might have more materials than reaction schemes, so it's not obvious to STAR which reaction scheme belongs with which fluid stream. It's part of your problem specification. This is done with the chscheme command or in Liquids & Gases -> Chemical Scheme.
  Reply With Quote

Old   March 12, 2004, 23:48
Default Re: Combustion
Posts: n/a
For this problem if u are using Starguide means, go to Modules-->Chemical and define the chemical scheme.If u wnat to annex any user equations u give the equations in Define scheme.

Then to tell the software this chemical scheme is associated with fluid, go to the Thermophysical Models and properties folder-->Liquids and gases--> Chemical Scheme--> Associated with. If u proceed the same steps u will be able to finish ur problem.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
combustion model in premixed combustion chamber wuyu FLUENT 9 February 16, 2018 10:40
Hydrogen Air combustion in a combustion chamber popi CFX 7 July 11, 2007 18:40
Sawdust Combustion-Non-premixed Combustion Model Jessy FLUENT 1 June 19, 2007 10:59
combustion in internal combustion engine George Main CFD Forum 0 September 7, 2006 14:41
combustion prasat Main CFD Forum 1 June 16, 2003 13:17

All times are GMT -4. The time now is 19:55.