CFD Online Logo CFD Online URL
Home > Forums > Siemens

Pressure Coefficient

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 11, 2004, 15:52
Default Pressure Coefficient
Posts: n/a

How can I plot pressure coefficient arround my model? Thank you all.

  Reply With Quote

Old   March 18, 2004, 11:40
Default Re: Pressure Coefficient
Posts: n/a
Store absolute pressure in any register. By the operate command subtract from the absolute pressure the upstream static pressure, then divide by (.5*rho*v_upstream^2) and store in register 4. Now you can plot Cp.
  Reply With Quote

Old   April 14, 2004, 15:45
Default Re: Pressure Coefficient
Posts: n/a
Hello Roadracer,

I did as you said. But it was not what I really want. I like to put the pressure coefficient number arround the my car model in the center section. Can you or anybody else can help me? Thank you.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure coefficient Giuseppe FLUENT 2 July 26, 2015 03:19
Pressure coefficient ecram Siemens 2 November 18, 2008 06:00
Pressure Coefficient in X - Direction Matthias FLUENT 0 April 6, 2007 21:43
pressure coefficient justindhy FLUENT 2 April 5, 2006 06:43
naca2412 pressure coefficient tee Main CFD Forum 1 February 14, 2005 07:37

All times are GMT -4. The time now is 02:46.