CFD Online Logo CFD Online URL
Home > Forums > Siemens

Energy handling with STAR

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 19, 2004, 04:48
Default Energy handling with STAR
Posts: n/a
Hi, In some of the stationary component compressible analysis STAR shows converged solution and we see there is a reduction in total temperature in the computational model.

Is there any specific way to avoid it

Thanks Veera
  Reply With Quote

Old   June 20, 2004, 11:06
Default Re: Energy handling with STAR
Posts: n/a
Check if your enthalpy balance (in the .info file) is OK. If not, since you calculate the total temperature from the enthalpy (provided that the Cp is constant), you should effectively find out a difference in total temperatures. The only way to avoid it: get down with the convergence criteria (use, say 1.e-4 instead of 1.e-3). To check the balance in the .info file, you need to have residual and conservation checks activated (STAR GUIde -> Analysis Controls -> Output Controls -> Monitor Numeric Behaviour)
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Handling on exothermic energy - Urgent Priya FLUENT 2 February 4, 2008 15:01
handling steam in fluent gnaneshwar FLUENT 4 May 7, 2005 23:02
Very large martix handling Vinay Kumar Main CFD Forum 5 December 9, 2002 11:07
handling conduction in CFX Trushar CFX 1 October 7, 2002 17:39
regarding low pressure handling subodh kumar Main CFD Forum 1 November 20, 1999 23:23

All times are GMT -4. The time now is 19:12.