CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

Cyclic Boundaries -> Match Option -> Arbitrary

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   August 4, 2004, 12:47
Default Cyclic Boundaries -> Match Option -> Arbitrary
Posts: n/a
Dear All, I'm trying to set a pair of cyclic boundaries for my mesh. As I know the two surfaces I'm gonna match are not one to one, I have decided to use Match Option of Arbitrary. However, when i have tried to apply it, there was always an error message came out, saying the offsets of cyclic regions are not opposite. I know that there must be something wrong with my offsets values. Therefore, I would like to know how i can fix this problems and how i can determine the values of the offset values when i try to define the cyclic boundaries. Thanks a lot!

  Reply With Quote

Old   August 4, 2004, 23:06
Default Re: Cyclic Boundaries -> Match Option -> Arbitrary
Posts: n/a
Try adding minus sign on one of the sides. Dont know which side, u have to try.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
error in cyclic boundaries match Steve Siemens 2 March 4, 2008 05:32
Arbitrary Cyclic beta code luca OpenFOAM Running, Solving & CFD 0 June 13, 2007 11:10
Arbitrary cyclic patch luca OpenFOAM Running, Solving & CFD 5 December 21, 2006 18:50
cyclic match errors sankar Siemens 3 December 3, 2004 07:46
Arbitrary Matching & Partial Boundaries George Siemens 6 July 10, 2001 10:58

All times are GMT -4. The time now is 01:15.