CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

how to deal with the collapsed faces

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 14, 2005, 20:13
Default how to deal with the collapsed faces
  #1
limingtiger
Guest
 
Posts: n/a
when i check gridsŁ¨double vertices and collapsed facesŁ©, there is always an error "collapsed faces found in model",i use command cflip to fix the problems but always failed, how can i deal with this trouble.
  Reply With Quote

Old   July 15, 2005, 02:42
Default Re: how to deal with the collapsed faces
  #2
Anton Lyaskin
Guest
 
Posts: n/a
Are you sure that you're using CFLIP with the proper option? BTW, which option do you use?
  Reply With Quote

Old   July 15, 2005, 06:44
Default Re: how to deal with the collapsed faces
  #3
james
Guest
 
Posts: n/a
You please check how you merged vertices after importing grids. If You have given more tolerance between the merged vertices then collapsed faces may come. Also check whether you used the option cset only while assembling grids. Then collapsed face problem may not arise.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PostChannel collapsed field result inconsistancy maka OpenFOAM Post-Processing 9 March 5, 2008 04:50
Problems with Meshing: Collapsed Cells Emmanuel Resch Siemens 1 July 30, 2007 03:02
negative volume & collapsed faces Tipakorn Siemens 1 March 7, 2006 00:41
Collapsed faces Aline Siemens 2 July 7, 2004 06:50
Collapsed cells Julie Polyakh Siemens 1 July 10, 2003 15:41


All times are GMT -4. The time now is 16:40.