|
[Sponsors] |
October 20, 2005, 04:07 |
Problem with Starcd V 3.22 and 3.24
|
#1 |
Guest
Posts: n/a
|
I have starcd version installed on my machine. Later i removed 3.22 and installed version 3.24. Version 3.24 was working fine.
Later i removed 3.24 and installed again 3.22 While compiling star cd is giving me error gtutil6.1.dll file not found. Anyone has idea why this problem is coming. Thanks in advance Amarjeet |
|
October 20, 2005, 06:55 |
Re: Problem with Starcd V 3.22 and 3.24
|
#2 |
Guest
Posts: n/a
|
me too face problems in 3.22. One of them is 'one can not assign section no 12 in pscr command' try doing this. it will give error that it is already assigned.
Whats wrong with number 12. |
|
October 25, 2005, 13:50 |
Re: Problem with Starcd V 3.22 and 3.24
|
#3 |
Guest
Posts: n/a
|
According to the release note of STAR-CD.
If you want to couple GTpower and STAR-CD, you should use Version 3.24. It works fine with the tutorial 8 of GT-power. I think that the version 3.22 have a lot of problem. The path for install is different, and the GUI have many problem too. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Negative Density problem in starcd | Dinesh | Siemens | 4 | January 26, 2009 13:53 |
Problem with starcd in parallel | Alessio Comisso | Siemens | 1 | April 10, 2008 13:33 |
StarCD v4 *.pstt file problem | Rotan | Siemens | 3 | September 17, 2007 06:01 |
StarCD display problem | cfddummy | Siemens | 3 | April 9, 2007 17:59 |
Convert from StarCD 3.10 to StarCD 3.15 | Jing | Siemens | 1 | April 17, 2002 10:22 |