CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

how to draw velocity profile(in unstructure pipe )

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 17, 2005, 06:56
Default how to draw velocity profile(in unstructure pipe )
  #1
lenson
Guest
 
Posts: n/a
recently I deal with a model using "gambit" software to import in the star cd. The model is a unstructure pipe . I want to get the calculated velocity profile in the outlet of the pipe . Because of unstructure grids,I can not get the vertex set to draw the velocity profile. can anyone help me? thx~
  Reply With Quote

Old   October 17, 2005, 12:50
Default Re: how to draw velocity profile(in unstructure pi
  #2
steve
Guest
 
Posts: n/a
There are several ways of putting in "sensor" points anywhere you want. They don't have to correspond to pre-existing vertices.
  Reply With Quote

Old   October 18, 2005, 08:52
Default Re: how to draw velocity profile(in unstructure pi
  #3
ztdep
Guest
 
Posts: n/a
how to put in "senso" points

regards
  Reply With Quote

Old   October 18, 2005, 16:38
Default Re: how to draw velocity profile(in unstructure pi
  #4
Tom
Guest
 
Posts: n/a
You can define a vertex at the centroid of other verices using the command VVERTEX or cells using the VCELL command. Then use SENSOR,ADD to put the sensors there. Use the help command, of course to get the details of these commands.

Tom
  Reply With Quote

Old   October 19, 2005, 09:57
Default Re: how to draw velocity profile(in unstructure pi
  #5
ztdep
Guest
 
Posts: n/a
where can i get the every command in star-cd ,

regards
  Reply With Quote

Old   October 19, 2005, 16:42
Default Re: how to draw velocity profile(in unstructure pi
  #6
staruser
Guest
 
Posts: n/a
Look at help in proSTAR. There is a section called "Commands" (I think). This should contain all commands available in proSTAR. An easier way is to use "help" on the command line or F1. In the help window you can enter a key word ("sensor" in this case); with "Enter" you can browse through all commands where the key word is mentioned in the description.

Regards
  Reply With Quote

Old   October 25, 2005, 13:00
Default Re: how to draw velocity profile(in unstructure pi
  #7
tomosada
Guest
 
Posts: n/a
In the version of 3.2x.

The new gui of grapher is very easy to use.

1. You can choose two vertexs to make a line and setting the number of extract data points (a little like tecplot).

2. load the varable you want.

3. creat the draw.

  Reply With Quote

Old   October 26, 2005, 05:21
Default Re: how to draw velocity profile(in unstructure pi
  #8
lenson
Guest
 
Posts: n/a
To tomosada: if the model built in star cd version 3.15 runs to convergent condition , can I open the model in version 3.2x ?

  Reply With Quote

Old   November 19, 2005, 06:13
Default Re: how to draw velocity profile(in unstructure pi
  #9
haji
Guest
 
Posts: n/a
Laminar, Transition and Turbulent Region Flows â€" Images and
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to draw the velocity of phases separately kb FLUENT 0 August 25, 2007 07:25
How to draw transversal velocity profile Kb FLUENT 3 August 24, 2007 20:54
How to draw pipe mesh Ismael FLUENT 2 March 3, 2007 16:27
Buy software for draw vector velocity Yassin FLUENT 0 January 18, 2006 11:35
Draw velocity profiles in tecplot scubme FLUENT 1 December 3, 2004 08:48


All times are GMT -4. The time now is 19:58.