|
[Sponsors] |
![]() |
![]() |
#1 |
Guest
Posts: n/a
|
hello everybody,
i hope somebody can help me with my problem. i have only a plate (material is aluminium) with a temperature of 60°C. i want to simulate the heat flux in the air in the case of free convetion. the stream should be laminar. the air is 20°C warm. the plate has the dimensons of 0,5m length and 0,5m width. how can i realize this problem with star_cd. if the problem is unclear don't hesitate to ask me questions. chris |
|
![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
Try to chek tutorials of star-cd. You can find all answers here.
|
|
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
For this star-ccm+ is recommended. You can download it from the support website and it uses the same license. You can define the interface aluminium and air easily. How come you were recommended star-cd for your type of study?
|
|
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
Hi Chris. Assign cell type: Solid for the plate Fluid for the environment Then assign to the plate a wall boundary condition in which you enforce an heat flux (60 - 20)* 15 = 600 W/m^2 You can change the coefficient in a range of 0 - 15. That's all
|
|
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to simulate a fan? | Andy | CFX | 9 | July 14, 2008 10:49 |
HELP how to simulate my problem? | Romain | FLUENT | 0 | July 12, 2005 12:50 |
How to simulate.. | Sharad Dugad | FLUENT | 0 | March 12, 2002 15:27 |
pls explian me how to simulate 2d-labyrinth seal problem using fluent4.23 | murali mohan | Main CFD Forum | 0 | October 26, 1999 01:40 |
How can i simulate? | Sung J.Joong | Main CFD Forum | 0 | August 19, 1999 02:53 |