CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

A question about the StarCD mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 7, 2006, 18:51
Default A question about the StarCD mesh
  #1
HSeldon
Guest
 
Posts: n/a
Hi all, Iīm a Fluent user, and I would like to give a try to the polygonal mesh (I think itīs the name) that StarCD does. Can I import those meshes to Fluent? And appart from that, how good is it? I mean, itīs really true that you need less cells to run the same simulation than the standart meshes? Can you tell me the advantages and disadvantages of those meshes?

Thanks for your time!
  Reply With Quote

Old   November 14, 2006, 02:42
Default Re: A question about the StarCD mesh
  #2
Sidd
Guest
 
Posts: n/a
Fluent, i think is node based solver. For that you would need nodes connectivity to be 100%. In Star-CD solver you have the option of having hanging nodes mesh. So if your StarCD mesh is having 100% nodes connectivity, you should be able to import it to Fluent.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
read mesh from starcd-ccm+ jack Siemens 1 August 12, 2008 08:40
how to import gambit mesh to starcd kathir Siemens 2 June 27, 2006 05:16
Mesh in stardesign to starcd! xhliu1 Siemens 2 July 7, 2005 00:06
transfer mesh in stardesign to starcd xhliu1 Siemens 1 June 19, 2005 04:35
Can not using moving mesh in starCD of linux xhliu1 Siemens 4 October 17, 2004 10:12


All times are GMT -4. The time now is 11:51.