CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

proam errors

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   November 10, 2006, 22:37
Default proam errors
Posts: n/a

I am trying to import a .dbs file into proam.

1. It gives me an error that the Database does not exist. 2. prostar says the model has no errors. When I am trying to import the same model proam says non manifold errors. 3. proam did not generate a volume mesh even when I check the close free edges and fill holes option in the mesh wizard.

Can someone help please.
  Reply With Quote

Old   November 12, 2006, 04:33
Default Re: proam errors
Posts: n/a
1. Are you selecting the right dbs number? 2. Pro-STAR doesn't care about non-manifold edges, pro-am does 3. Don't use the mesh wizard then....
  Reply With Quote

Old   November 13, 2006, 04:56
Default Re: proam errors
Posts: n/a
After loading the correct .dbs file, if you are unable to generate the volume mesh from 2D, saying something like "No-Manifold topology". It means there is some problem with your 2D mesh. It can be bad orientation of cell vertices, or something else.

You should first check with the check surface tool, putting all the options on. For non-manifold topology, shell orientation etc. Many times orientation problem gives you negative volume problem or non manifold topology problem. You should first rectify these problems using the repair tools in Proam. And you should make sure there is no manifold problem, before going for volume mesh generation.

Hope it will help.

good luck.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Proam: Assembly Bala Siemens 1 March 15, 2008 20:21
Help proam yogesh Siemens 8 February 16, 2006 05:19
proam issue novice Siemens 1 April 21, 2005 02:04
proam sankar Siemens 0 February 23, 2005 04:58
Proam cpmatches Erika Siemens 3 November 8, 2004 19:21

All times are GMT -4. The time now is 20:52.