CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

Failed to get license

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 15, 2007, 02:54
Default Failed to get license
Posts: n/a
Hi: I created the mesh and set the boundary conditions in Pro-STAR. Now when I try to run it I get following error message. We already have the license in the license folder. How can I solve this problem? Thanks.

Failed to get all licenses needed for this job. Asked for 1 licenses of starsolver|starhpc|starsuite PNP: Shutdown [2007-02-14-23:54:06] Execution aborted by request (SIGABRT) after 18 seconds (TOTAL ELAPSED TIME).
  Reply With Quote

Old   February 17, 2007, 12:48
Default Re: Failed to get license
Posts: n/a
how many licenses do you have? If you only have one you won't be able to have pro-star open at the same time as running the solver
  Reply With Quote

Old   February 17, 2007, 14:10
Default Re: Failed to get license
Posts: n/a
Thank you for your response. We have total ten licenses, however, we are using only one in that machine. It's running now. Thank you.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
subsurface failed star-user Siemens 4 April 9, 2008 05:58
RPC RCX_check_license_connection failed Zenith FLUENT 0 March 20, 2007 04:57
Failed foamInstallationTest craiger OpenFOAM Installation 7 March 2, 2007 06:18
Failed separation Kostas FLUENT 3 July 28, 2003 09:31
RPC RCX_CLIENT_LS Failed ??!! Thierry FLUENT 0 April 9, 2003 03:03

All times are GMT -4. The time now is 15:52.