CFD Online Logo CFD Online URL
Home > Forums > Siemens

transient file openning problem

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 22, 2007, 06:51
Default transient file openning problem
Posts: n/a
Hi all, when I open the transient file in post-processing, i got error message "**error reading transient file" and "error opening file xx.pstt" there are 3600 time steps, the rotor rotates for 360 degrees, and time step for period is equal to 0.1, and every one degree writes data. The size of transient file is 6.57 GB.It took more than one day for get solution, ahh,,,!!. please someone advise how i can solve this.

  Reply With Quote

Old   June 26, 2007, 03:09
Default Re: transient file openning problem
Posts: n/a
Hi. May be you try do it in windows release of star-cd. If it's true - this is impossible. Windows release of star-cd can't operate with *.pst file bigger than 2gb. Use linux.
  Reply With Quote

Old   June 26, 2007, 06:58
Default Re: transient file openning problem
Posts: n/a
ok, thanks for your advice, i will try that.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Output transient file to csv Ben CFX 3 September 23, 2008 08:17
transient file openning problem EAR Siemens 2 April 14, 2008 03:27
Openning files in star-cd 4.02 David Baker Siemens 6 June 20, 2007 01:44
Openning Outlet David CFX 3 December 17, 2002 13:31
Question on openning mesh from Fluent Derek Jing FLUENT 5 April 22, 2002 15:55

All times are GMT -4. The time now is 17:01.