|
[Sponsors] |
August 18, 2007, 04:58 |
feasibility
|
#1 |
Guest
Posts: n/a
|
Hi all Is the multi phase flow of fuel and air in the induction system(inlcluding carburetor)of IC engine can be analysed in STAR CD?
Carburation involves of the flow/atomization of fuel in the main and idle jet on the venturi based on the pressure difference. Can this be simulated along with the air flow in STAR CD ? Need clarification? Thanks |
|
August 18, 2007, 09:56 |
Re: feasibility
|
#2 |
Guest
Posts: n/a
|
You can model the atomisation using VOF and LES but you will need a very large cell count to accurately model the breakup so it only really feasible on a local scale. If you wish to model the whole system you are better off looking at using lagrangian two phase.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Feasibility of wind tunnel testing at Re~10^4 | zonexo | Main CFD Forum | 1 | September 27, 2006 09:32 |
CFD feasibility in Damper Design? | TauMax | Main CFD Forum | 3 | August 13, 2003 10:31 |