|
[Sponsors] |
March 6, 2008, 04:05 |
Assigning Wall Roughness in STAR-CD
|
#1 |
Guest
Posts: n/a
|
Hi ,
I am trying to assign roughness to no slip wall. I could see that there are three constants A , B and C which has by default values of 8.5, 0 and 1 respectively. Then user has to input efective wall roughness(y0) and displancement(D). I went through Manual. Then I did calculate thickness of laminar sublayer. The roughness I want to include corresponds to completely rough wall. My question is that while assigning copletely rough wall, shall I have to just input efective wall roughness (y0) and have to keep everything else (A,B,C and D) as it is ? is this correct what I understood from Manual and reference for wall roughness. Thanks in advance. Thank you for your time and consideration. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wall Roughness | LKF | FloEFD, FloWorks & FloTHERM | 5 | May 8, 2008 11:22 |
Assigning Wall Roughness in STAR-CD | Sachin | Siemens | 1 | March 11, 2008 12:24 |
Wall Roughness | Rex | FLUENT | 0 | February 5, 2002 11:54 |
wall roughness | merac | Main CFD Forum | 2 | June 14, 2001 20:48 |
How can I set wall roughness? | Ellen | FLUENT | 5 | February 27, 2001 23:13 |