CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

help!!(starccm+)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 25, 2008, 21:14
Default help!!(starccm+)
  #1
sally
Guest
 
Posts: n/a
I`m doing a starccm+ simulation about gas-solid heat transfer. gas temperature and heat transfer coeffiecient were known. how can set the heat transfer coeffiecient values? Please help me to solve this problems

Thanks

  Reply With Quote

Old   June 26, 2008, 11:33
Default Re: help!!(starccm+)
  #2
name
Guest
 
Posts: n/a
Open the boundary node on the tree..

Boundary >> Physics Conditions >>Thermal Specification change the Model As Convection..

then.. For gas temperature Boundary >> Physics Values >> Ambient Temperature >> Constant

for boundary heat transfer coefficient Boundary >> Physics Values >> Heat Transfer Coefficient >> Constant..

  Reply With Quote

Old   June 26, 2008, 21:20
Default Re: help!!(starccm+)
  #3
sally
Guest
 
Posts: n/a
Thank you for your information i think gas temperature Boundary and heat transfer coefficient Boundary are the same, is it right? thanks a lot !
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
RNG with StarCCM+ ? GGo Siemens 2 October 29, 2008 06:41
VOF in starccm+ kamal Siemens 1 December 7, 2007 07:54
Starccm+ Ahmed Siemens 5 July 23, 2007 03:21
Import in to starccm+ vidyaprakash Siemens 6 January 5, 2007 22:36
STARCCM+ tina Siemens 2 May 2, 2006 10:34


All times are GMT -4. The time now is 05:58.