|
[Sponsors] |
New STAR-CCM+ User... I need an urgent help please |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 8, 2012, 00:06 |
New STAR-CCM+ User... I need an urgent help please
|
#1 |
New Member
Ahmed
Join Date: Oct 2012
Posts: 1
Rep Power: 0 |
Hi All,
I'm a new student and i have been taking CFD course. The doctor at the university asked us to choose one idea to use it in CFD after model it in SolidWorks. Actually, i have chosen to model Gate Valve. I have no idea what parameters and values i have to use as initial, boundary conditions and other important parameters. Please help me in this project and i'm wondering that, if i can find tutorials for how to model a gate valve (industrial Gate Valve) and simulate it in STAR CCM+ to check the pressure drop and Cv and the flow path. Your support will be appreciated in this important matter. Thanks, |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
Urgent star ccm help | itsme_kit | Siemens | 4 | February 2, 2012 17:54 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
error in star ccm | maurizio | Siemens | 3 | October 16, 2007 05:17 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |