|
[Sponsors] |
February 25, 2013, 22:48 |
Piston Cooling Nozzle Simulation
|
#1 |
New Member
Join Date: Feb 2013
Posts: 10
Rep Power: 13 |
Hiii everyone...
I'm trying to simulate a piston cooling jet simulation where the oil jet (for piston cooling) is issued when the piston is at BDC and continues till the piston reaches TDC. The oil jet enters into the piston oil gallery hole (given in the piston undercrown) when the piston travels from BDC to half way up (i.e. stroke/2). Rest of the motion i.e half way of the stroke till TDC the oil jet hits piston undercrown surface. Now, the outputs needed from the simulation are: a) HTC of the Piston b) Temperature Profiles of the Piston Undercrown c) Cocktail shaking phenomena of the oil in the oil gallery. I will have to use VOF, piston motion actuation via translation function in motions tool. but being a very amateur user of CFD and dont have any idea how to proceed. I think i have taken a big project as per my level Regards RD |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
convergent_divergent nozzle simulation in CFX-11 | sivarama1 | CFX | 22 | February 18, 2013 16:23 |
simulation of piston motion inside a hydraulic cylinder | mosman | Main CFD Forum | 0 | August 7, 2011 01:40 |
simulation of piston motion inside a hydraulic cylinder | mosman | FLUENT | 0 | August 6, 2011 15:44 |
General: Cooling rips + cooler simulation how? | eRzBeNgEl | Main CFD Forum | 0 | July 6, 2011 08:48 |
Regenerative cooling nozzle. | Brian | Main CFD Forum | 0 | November 10, 2003 01:11 |