|
[Sponsors] |
Electric mesh and thermal mesh in battery module |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 14, 2015, 00:39 |
Electric mesh and thermal mesh in battery module
|
#1 |
New Member
Join Date: Jan 2015
Posts: 1
Rep Power: 0 |
Hello,
I am creating a cooling plate for li ion batteries. I can keep the temperature uniform throughout the battery. My problem is with the voltage curve. It is same for with cooling and without cooling. Usually electric mesh takes the temperatures from thermal solver and calculates voltage and current. But in my case it is not working. I need help in solving problems with meshing and time step. |
|
Tags |
battery design studio, ecel, electric solver, star ccm+ v7, thermal solver |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 08:38 |
Minimum volumesh Mesh Size for very thin solids in Thermal analysis | Abhya | FLUENT | 1 | December 15, 2014 10:09 |
Error finding variable "THERMX" | sunilpatil | CFX | 8 | April 26, 2013 08:00 |
Thermal transient with Euler mesh | M.S.Niazi | ANSYS | 0 | January 29, 2013 09:42 |
increasing mesh quality is leading to poor convergence | tippo | CFX | 2 | May 5, 2009 11:55 |