|
[Sponsors] |
January 14, 2016, 04:43 |
2-D Simuation
|
#1 |
New Member
Samuel Alfred
Join Date: Jul 2015
Posts: 9
Rep Power: 10 |
Please I want to set up a two dimensional geometry and simulation in Star CCM+. Please how do I do this ? I know how to go about a 3-D geometry but unfortunately not 2-D .Thanks
|
|
January 17, 2016, 07:55 |
|
#2 |
New Member
Hamed
Join Date: Jul 2012
Posts: 16
Rep Power: 13 |
Hi,
As you know how to do 3D, it's pretty easy to do 2D. at first you need to create the geometry in 3D. Basically, it should be an extrude. Then you need to mesh it. At the end you can convert the 3D mesh to a 2D mesh. A helpful example is presented in CD-Adapco website: http://www.cd-adapco.com/sites/defau...FacingStep.pdf I hope you find this helpful. Good luck. Cheers, Aroma |
|
January 17, 2016, 17:22 |
|
#3 |
New Member
Samuel Alfred
Join Date: Jul 2015
Posts: 9
Rep Power: 10 |
Thanks alot.
|
|
January 17, 2016, 17:34 |
|
#4 |
New Member
Hamed
Join Date: Jul 2012
Posts: 16
Rep Power: 13 |
you're welcome
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
about the convection heat transfer coefficient for air conditioning room simuation | haier1984 | Main CFD Forum | 0 | August 24, 2012 23:00 |
need help in engine simuation | malki | FLUENT | 7 | April 12, 2012 23:49 |
Finding velocity temperature etc at a particular pt in space | srinath | OpenFOAM Running, Solving & CFD | 5 | January 6, 2009 07:30 |