 |
 |
 |
|
|
|
[Sponsors] | ||||
January 26, 2017, 11:19
|
Separating Air and Water drag
|
#1 |
|
New Member
mortaza
Join Date: Aug 2011
Posts: 8
Rep Power: 14  |
Hi Friends
How can I separate water and air drag for a ship modeled by vof method? |
|
|
|
|
|
January 31, 2017, 08:09
|
|
#2 |
|
Senior Member
Ping
Join Date: Mar 2009
Posts: 556
Rep Power: 20 |
create a threshold derived part with the hull and deck surfaces as the parts and vof of water as the field and set to above 0.5 and this new part will be the wetted surfaces to do some force reports on
then do the same with another new threshold part but use below 0.5 to get the air surfaces |
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Water diffusion into air | MGabr | CFX | 19 | September 3, 2023 19:06 |
| air into box filled with water, outflow for water at bottom | dieterdanger | Fluent Multiphase | 0 | July 16, 2015 16:11 |
| Coefficient of Drag for Air and Water | kilroy | Main CFD Forum | 3 | January 29, 2014 14:35 |
| air bubble is disappear increasing time using vof | xujjun | CFX | 9 | June 9, 2009 07:59 |
| Help!!!problems in air jet into water bath | kim | FLUENT | 4 | June 9, 2003 07:04 |
Linear Mode
