|
[Sponsors] |
August 20, 2018, 01:39 |
Tangential velocity specifications on Wall boundary
|
#1 |
Senior Member
|
Isn't it will be like MRF with single region. There is a option like wall tangential velocity which we can set as rotation. So I can specify impeller (fan/blade) wall boundary as MRF. We know that in MRF blade will not rotate and there is just a transfer of moment. So this should be possible with single region. I tried, but it didn't worked. Please help. And correct me if I am wrong.
TIA Last edited by ashokac7; August 31, 2018 at 02:55. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with chtMultiregionFoam radiation boundary condition | baran_foam | OpenFOAM Running, Solving & CFD | 10 | December 17, 2019 17:36 |
chtMultiRegionFoam- too slow | sandymech1 | OpenFOAM Running, Solving & CFD | 4 | November 20, 2017 18:51 |
Boundary conditon of a baffle in the MRF region | bono | FLUENT | 1 | February 26, 2006 04:07 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |
[Gmsh] Import gmsh msh to Foam | adorean | OpenFOAM Meshing & Mesh Conversion | 24 | April 27, 2005 08:19 |