CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Regarding radiation simulation in STAR CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   February 27, 2019, 05:13
Question Regarding radiation simulation in STAR CCM+
New Member
nayan nikumbh
Join Date: Feb 2019
Posts: 1
Rep Power: 0
nnikumbh is on a distinguished road
I am running simulation for radiation heat losses on STAR CCM+. I would like to know that what parameters are the one's to focus on.
I have tried varying patch/face proportions study, number of beams, polygons per voxel, etc.
Which one's we need to vary? Also apart from the above mentioned one's are there any other parameters that I should be worried about to get good results?
nnikumbh is offline   Reply With Quote


radiation, simulations, star ccm+

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
simulation radiation and convection taban OpenFOAM Running, Solving & CFD 0 September 6, 2015 03:41
Thermal Comfort Simulation in STAR CCM+ anupmu STAR-CCM+ 1 February 27, 2013 14:25
how to open star ccm 6.04 version file in older versions pritam.edke Siemens 2 June 25, 2012 03:14
error in star ccm maurizio Siemens 3 October 16, 2007 05:17
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 04:15

All times are GMT -4. The time now is 08:08.