CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Creating Antifouling coating in starccm+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 15, 2019, 21:45
Default Creating Antifouling coating in starccm+
  #1
New Member
 
Abhiroop
Join Date: May 2019
Posts: 2
Rep Power: 0
abhiroopk is on a distinguished road
Sir,
I am doing a project on Predicting the effect of biofouling on ship resistance using starccm+. so how to create the roughness in the starccm+.
abhiroopk is offline   Reply With Quote

Old   May 20, 2019, 04:57
Default
  #2
Member
 
Steve
Join Date: Mar 2018
Location: South Korea
Posts: 69
Rep Power: 3
steve lee is on a distinguished road
Use help..
you can set the way to input roughness constant(as i remember Ra..) for wall..
steve lee is offline   Reply With Quote

Reply

Tags
cfd

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenFoam restarting simulation, stops at first Time loop syntex OpenFOAM Running, Solving & CFD 4 April 5, 2019 12:20
[Commercial meshers] Fluent3DMeshToFoam simvun OpenFOAM Meshing & Mesh Conversion 49 July 2, 2018 23:50
[mesh manipulation] Importing Multiple Meshes thomasnwalshiii OpenFOAM Meshing & Mesh Conversion 18 December 19, 2015 19:57
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam) cfdonline2mohsen OpenFOAM 3 October 21, 2013 10:28
Problem in running ICEM grid in Openfoam Tarak OpenFOAM 6 September 9, 2011 18:51


All times are GMT -4. The time now is 23:47.