Wing Meshing Issues -- CFD Online Discussion Forums

March 26, 2021, 06:23	Wing Meshing Issues	#1
Kendricklamar New Member Abdulrahman Join Date: Nov 2020 Posts: 3 Rep Power: 5	Hey guys. I am modelling a tapered and swept 3D wing and I am having trouble with the meshing. In one of the pictures attached is a cross section of the mesh, and it seems like the prism layer is mixing with the poleyhedral mesh. Is this affecting my results? The solution also does not converge using the segregated solver, only with the coupled. y+ values are less than 2 so I assume the mesh is fine enough? Any help would be appreciated. Screenshot 2021-03-26 141647.png Screenshot 2021-03-26 141751.jpg

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Gmsh] gmshToFoam generates patches with 0 faces and 0 points	Simurgh	OpenFOAM Meshing & Mesh Conversion	4	August 25, 2023 07:58
3D wing meshing issues on inlet (ICEM)	sakibrah	ANSYS	0	May 5, 2020 03:22
[DesignModeler] Meshing a Delta Wing ANSYS CFX - Cannot get inflation around the tip of the wing?	Jack121	ANSYS Meshing & Geometry	0	April 12, 2019 10:08
[ICEM] Problem with a C-Grid meshing technique for a wing	GodotMisogi	ANSYS Meshing & Geometry	1	May 22, 2017 03:50
[GAMBIT] Meshing of flipper wing	dv.darshan	ANSYS Meshing & Geometry	9	May 21, 2012 01:38

All times are GMT -4. The time now is 05:46.