[vadyashayah]

Hello! Please help me! when i doing in ES-ICE "meshing with the trimming method" at a certain stage pops up error: "IceTemplate, Create
You must first store the sections that define the base grid.
Error writing to the base grid file.
Could not write the temporary file."
What should I do?

[skylent]

in the “create template” panel，click “store”，after finishing adjusting the parameters and the structures/layouts of all the sections.

bless.

Originally Posted by vadyashayah

Hello! Please help me! when i doing in ES-ICE "meshing with the trimming method" at a certain stage pops up error: "IceTemplate, Create
You must first store the sections that define the base grid.
Error writing to the base grid file.
Could not write the temporary file."
What should I do?

[vadyashayah]

thank you very much

[vadyashayah]

Originally Posted by skylent

in the “create template” panel，click “store”，after finishing adjusting the parameters and the structures/layouts of all the sections.

bless.

One more question. I have a two-stroke engine, but it asks for a file "valve01.dat". It is necessary to make the valve? or simply somewhere to put a tick that simple?

[skylent]

May be the following will be okay.
Create Template/General parameters panel:
Base style:0 or 1 valve
------------------------------------------
Create Template/Valves/Valve1 panel:
Style(Trimmed):None
------------------------------------------

Originally Posted by vadyashayah

One more question. I have a two-stroke engine, but it asks for a file "valve01.dat". It is necessary to make the valve? or simply somewhere to put a tick that simple?

[vadyashayah]

Originally Posted by skylent

May be the following will be okay.
Create Template/General parameters panel:
Base style:0 or 1 valve
------------------------------------------
Create Template/Valves/Valve1 panel:
Style(Trimmed):None
------------------------------------------

Thank you, you very much helped me!!Can I still apply to you, if i have any questions??

[vadyashayah]

Originally Posted by skylent

May be the following will be okay.
Create Template/General parameters panel:
Base style:0 or 1 valve
------------------------------------------
Create Template/Valves/Valve1 panel:
Style(Trimmed):None
------------------------------------------

the problem is not long in coming, when I generate files required by prostrar, there is a problem: in "Main" window - Some of the data required to find the fixed vertices is missing.
"IceRead,filename,Modify" will supply it.
Ice write completed to the file "D:\user\Shayakhmetov\12.07.12\xes-izLs7Ae".
in "child output" window - File Version 2.14.005 (windows-x86).
Resume completed from the file "D:\user\Shayakhmetov\12.07.12\save_ice".
es-ice and Ice are using templates with different numbers of valve collapsing layers (0 and 11).
You can fix the number of valve collapsing layers Ice is using, by running the es-ice command:
IceTemplate,Create,"-override-n_max_valve_lift=0"
Error reading from the es-ice file.
Failed.