|
[Sponsors] |
January 27, 2010, 08:15 |
stagnation pressure boundary problem
|
#1 |
New Member
Join Date: Mar 2009
Posts: 7
Rep Power: 17 |
Hi everyone,
I am simulating a simple case with a inlet and a outlet, using stagnation pressure boundary condition for inlet and pressure boundary for outlet. However, I cannot figure out why star-cd always tell me "Error 012: Static pressure greater than stagnation pressure at region 1 negative. Try to lower relaxation factor for pressure and/or velocities." The stagnation pressure is set as 1000 at the inlet, with outlet pressure 0. There is no other way to setup the boundaries any more, as we only know the inlet and outlet pressure. Many thanks in advance! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to give pressure boundary condition in SIMPLER algorithm | shyamprasad | Main CFD Forum | 0 | March 16, 2009 23:40 |
stagnation pressure boundary condition | xqy | Phoenics | 6 | July 1, 2004 03:43 |
how to set the stagnation pressure boundary | xqy | Phoenics | 4 | November 28, 2002 20:04 |
Role of Boundary Pressure | Jim Park | Main CFD Forum | 2 | May 29, 2000 01:13 |
Pressure boundary condition | Brindaban Ghosh | Main CFD Forum | 6 | May 3, 2000 13:11 |