|
[Sponsors] |
Problem with exporting solution data concerning the coordinate System |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 9, 2015, 02:49 |
Problem with exporting solution data concerning the coordinate System
|
#1 |
New Member
A. Ldt
Join Date: Oct 2015
Posts: 1
Rep Power: 0 |
Hi,
currently I am working with Workbench 15 (static structural). I am analysing the middle part of a Knee implant(which is a part of the model). Therefore I want to export the data (to excel) for stress and deformation, to plot the surface data. I already constructed a local coordinate system ("Knee"), because the global coordinate system is turned in a unfavourable way. To refer to the local coord. system I chose the Directional Deformation where you can choose the coordinate system. The deformation data I got from the export seemed right. But my problem is, that the geometry information (x,y,z) doesn't belong to the "Knee" system(like I want), but to the global coord sys. Is there a possibility to export the geometry data in reference to a local coord. system? or do you have an idea, how I could manage the problem above? Thank you very much for some help! |
|
Tags |
coordinate system, data, deformation, export, local |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FSI problem with system coupling: Fail to couple FLUENT | sophieUNSW | FLUENT | 16 | October 1, 2020 06:20 |
Naca 0012 (compressible and inviscid) flow convergence problem | bipulsaha | FLUENT | 1 | July 6, 2011 08:51 |
IcoFoam parallel woes | msrinath80 | OpenFOAM Running, Solving & CFD | 9 | July 22, 2007 03:58 |
Could anybody help me see this error and give help | liugx212 | OpenFOAM Running, Solving & CFD | 3 | January 4, 2006 19:07 |
Problem in Track Data | selen | Siemens | 2 | August 7, 2003 14:06 |