project on aircraft engine pylons

Air Slicer · March 18, 2019, 02:16

Respected Sir,

I am Nikhil Gouda studying at Jain University, Bangalore. Currently, I am pursuing Masters in Technology under Aerospace Structures specialization and doing my final year project on Structural Analysis on Aircraft Engine Pylons. I have been searching intensively throughout the journals and internet to generate a CAD file but since there is very less information, so I am unable to proceed with my project.
It would be very kind of you if you can share the CAD files for my project.

Thank you.
Yours Sincerely,

Nikhil Gouda
Dept of Aerospace Structures,
IIAEM, Jain University.

Gweher · July 30, 2019, 05:25

Hello Nikhil,

Strange that you didn't have further guidance just to generate the CAD file. I doubt that the main goal of your master thesis is to design an aircraft engine pylons, but rather to calculate the structural loads...

Without further information about the aircraft model, I would suggest you to have a look at free CAD models of aircraft available on grabcad for instance (https://grabcad.com/library/airbus-a320-sharklet-1)

Hope this helped

March 18, 2019, 02:16	project on aircraft engine pylons	#1
Air Slicer New Member Nikhil Gouda Join Date: Mar 2019 Location: Bangalore Posts: 1 Rep Power: 0	Respected Sir, I am Nikhil Gouda studying at Jain University, Bangalore. Currently, I am pursuing Masters in Technology under Aerospace Structures specialization and doing my final year project on Structural Analysis on Aircraft Engine Pylons. I have been searching intensively throughout the journals and internet to generate a CAD file but since there is very less information, so I am unable to proceed with my project. It would be very kind of you if you can share the CAD files for my project. Thank you. Yours Sincerely, Nikhil Gouda Dept of Aerospace Structures, IIAEM, Jain University.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM v3.0+ ??	SBusch	OpenFOAM	22	December 26, 2016 14:24
question about simulating aircraft engine flow	zztangnr	FLUENT	0	March 4, 2015 04:07
help need for my project: design n simulation of ic engine	sid87	ANSYS	5	February 27, 2012 22:03
Boundary Conditions for aircraft engine in Fluent 6.3	Tareen	FLUENT	0	July 20, 2011 00:05
Composite Engine Valve Project	cortez505	FLUENT	1	November 18, 2009 04:02

July 30, 2019, 05:25		#2
Gweher Senior Member Gwenael H. Join Date: Mar 2011 Location: Switzerland Posts: 392 Rep Power: 20	Hello Nikhil, Strange that you didn't have further guidance just to generate the CAD file. I doubt that the main goal of your master thesis is to design an aircraft engine pylons, but rather to calculate the structural loads... Without further information about the aircraft model, I would suggest you to have a look at free CAD models of aircraft available on grabcad for instance (https://grabcad.com/library/airbus-a320-sharklet-1) Hope this helped