|
[Sponsors] |
output results are not created in parallel compuations |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 21, 2015, 03:56 |
output results are not created in parallel compuations
|
#1 |
New Member
Join Date: Jul 2009
Posts: 18
Rep Power: 16 |
Hi,all,
i have tested SU2 2.3.1 in serrial and parallel. when it runs in serrial, the volume data was output as flow.dat, surface_flow.dat, however, when it runs in parallel, no flow.dat, surface_flow.dat were created. Different test cases, including naca0012, M6 wing, were test, the output results were not genearted.Hence, what is the problem, and can anyone give some suggestions on how to deal with it? |
|
May 26, 2015, 16:39 |
|
#2 |
Super Moderator
Thomas D. Economon
Join Date: Jan 2013
Location: Stanford, CA
Posts: 271
Rep Power: 14 |
Hi,
In order to avoid overheads when running in parallel, we only write restart files during runtime. Output files can then be generated from the restart using SU2_SOL. Please see more information in the documentation here: https://github.com/su2code/SU2/wiki/Post-processing. Hope this helps, Tom |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The results difference between parallel and serial run. | Hkp | OpenFOAM Running, Solving & CFD | 2 | April 17, 2014 02:26 |
parallel Grief: BoundaryFields ok in single CPU but NOT in Parallel | JR22 | OpenFOAM Running, Solving & CFD | 2 | April 19, 2013 16:49 |
results with parallel processing | Muhammad Shakaib | Main CFD Forum | 1 | December 29, 2005 00:56 |
CFX-5.7 MPICH Parallel Problem (Output of Results) | James Date | CFX | 7 | February 15, 2005 16:03 |
CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |