When I run the su2,there are some errors.

zkxfluid · February 23, 2023, 22:02

Running the quick start case appears the following errors.

SU2_CFD inv_NACA0012.cfg
[zkx-virtual-machine:236699] *** An error occurred in MPI_Win_create
[zkx-virtual-machine:236699] *** reported by process [3269853185,0]
[zkx-virtual-machine:236699] *** on communicator MPI_COMM_WORLD
[zkx-virtual-machine:236699] *** MPI_ERR_WIN: invalid window
[zkx-virtual-machine:236699] *** MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort,
[zkx-virtual-machine:236699] *** and potentially your MPI job)

What is the solution method of the above question.

zkxfluid · February 23, 2023, 22:13

The error change into the following:
[zkx-virtual-machine:236707] [[49881,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file ../../../orte/util/show_help.c at line 501

bigfootedrockmidget · March 9, 2023, 06:41

My guess is that you did not install mpi (correctly). Have you tried the serial solver? Please check that you have installed openmpi or mpich correctly

February 23, 2023, 22:02	When I run the su2,there are some errors.	#1
zkxfluid New Member kaixuan Join Date: Feb 2023 Posts: 2 Rep Power: 0	Running the quick start case appears the following errors. SU2_CFD inv_NACA0012.cfg [zkx-virtual-machine:236699] * An error occurred in MPI_Win_create [zkx-virtual-machine:236699] * reported by process [3269853185,0] [zkx-virtual-machine:236699] * on communicator MPI_COMM_WORLD [zkx-virtual-machine:236699] * MPI_ERR_WIN: invalid window [zkx-virtual-machine:236699] * MPI_ERRORS_ARE_FATAL (processes in this communicator will now abort, [zkx-virtual-machine:236699] * and potentially your MPI job) What is the solution method of the above question.

February 23, 2023, 22:13	I try the same commend SU2_CFD inv_NACA0012.cfg for the second time.	#2
zkxfluid New Member kaixuan Join Date: Feb 2023 Posts: 2 Rep Power: 0	The error change into the following: [zkx-virtual-machine:236707] [[49881,0],0] ORTE_ERROR_LOG: Data unpack would read past end of buffer in file ../../../orte/util/show_help.c at line 501

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM benchmarks on various hardware	eric	Hardware	778	April 23, 2024 16:56
Building OpenFOAM1.7.0 from source	ata	OpenFOAM Installation	46	March 6, 2022 13:21
How to use PIMPLE properly?	floquation	OpenFOAM Running, Solving & CFD	25	December 2, 2021 09:40
Inconsistencies in reading .dat file during run time in new injection model	Scram_1	OpenFOAM	0	March 23, 2018 22:29
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3	bookie56	OpenFOAM Installation	8	August 13, 2011 04:03

March 9, 2023, 06:41		#3
bigfootedrockmidget Senior Member bigfoot Join Date: Dec 2011 Location: Netherlands Posts: 506 Rep Power: 17	My guess is that you did not install mpi (correctly). Have you tried the serial solver? Please check that you have installed openmpi or mpich correctly