EnGrid makes SU2 grids

Speng · May 8, 2013, 16:00

http://engits.eu/en/engrid

"Since the 1.2 release, enGrid provides native export to OpenFOAM® and since 1.4 for SU2."

Has anyone tried this yet?

taxalian · May 9, 2013, 02:20

Hi Speng,

Is this just a normal query or you really want to use engrid with SU2. Can you explain a little bit more about your problem description, if you have any.

Thanks.

Speng · May 9, 2013, 08:38

Just wanted to make it known that this option was out there because I hadn't seen it mentioned before.

taxalian · May 9, 2013, 11:40

Hi Speng,
Well thats pretty fine with the query. For further information you can have a look at the following thread discussed at the enGrid forum section:

http://www.cfd-online.com/Forums/eng...foil-file.html

You will find at the end of this thread, where i asked the developer of enGrid about the SU2 mesh export.

Thanks.

Speng · October 31, 2013, 15:59

Taxalian, have you tried it? I'm about to start playing around with it and I don't want to be spending ages coming up with a good grid generation approach.

May 8, 2013, 16:00	EnGrid makes SU2 grids	#1
Speng New Member Join Date: Jan 2011 Posts: 22 Rep Power: 15	http://engits.eu/en/engrid "Since the 1.2 release, enGrid provides native export to OpenFOAM® and since 1.4 for SU2." Has anyone tried this yet?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Welcome to the Stanford University Unstructured (SU2) forum!	economon	SU2	0	January 7, 2013 02:48
New SU2 Forum Opened at CFD Online	pete	Site News & Announcements	0	January 5, 2013 17:59
Stanford University Unstructured (SU2) Open-Source Code Released Today	praveen	Main CFD Forum	1	May 21, 2012 20:52
engrid: Internal volume mesh becoming coarser during boundayr layer addition	Arnoldinho	OpenFOAM	1	January 22, 2011 04:31
structured and unstructured grids	user	Main CFD Forum	6	November 25, 2010 01:14

May 9, 2013, 02:20		#2
taxalian Senior Member Join Date: Nov 2010 Posts: 139 Rep Power: 15	Hi Speng, Is this just a normal query or you really want to use engrid with SU2. Can you explain a little bit more about your problem description, if you have any. Thanks.

May 9, 2013, 08:38		#3
Speng New Member Join Date: Jan 2011 Posts: 22 Rep Power: 15	Just wanted to make it known that this option was out there because I hadn't seen it mentioned before.

May 9, 2013, 11:40		#4
taxalian Senior Member Join Date: Nov 2010 Posts: 139 Rep Power: 15	Hi Speng, Well thats pretty fine with the query. For further information you can have a look at the following thread discussed at the enGrid forum section: http://www.cfd-online.com/Forums/eng...foil-file.html You will find at the end of this thread, where i asked the developer of enGrid about the SU2 mesh export. Thanks.

October 31, 2013, 15:59		#5
Speng New Member Join Date: Jan 2011 Posts: 22 Rep Power: 15	Taxalian, have you tried it? I'm about to start playing around with it and I don't want to be spending ages coming up with a good grid generation approach.