|
[Sponsors] |
SU2 installation succesful but failure when running |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 21, 2015, 04:38 |
SU2 installation succesful but failure when running
|
#1 |
New Member
Join Date: Jun 2013
Posts: 3
Rep Power: 12 |
Hi everyone,
I've installed SU2--master in server, there is no problem in the installation. When I run Quick Start cases I got this errors : A requested component was not found, or was unable to be opened. This means that this component is either not installed or is unable to be used on your system (e.g., sometimes this means that shared libraries that the component requires are unable to be found/loaded). Note that Open MPI stopped checking at the first component that it did not find. Host: server Framework: crs Component: none -------------------------------------------------------------------------- [server:24496] *** Process received signal *** [server:24496] Signal: Segmentation fault (11) [server:24496] Signal code: Address not mapped (1) [server:24496] Failing at address: 0x28 [server:24496] [ 0] /lib/x86_64-linux-gnu/libpthread.so.0(+0xf0a0) [0x7fcd04d710a0] [server:24496] [ 1] /usr/lib/libopen-pal.so.0(mca_base_select+0x106) [0x7fcd05d5f356] [server:24496] [ 2] /usr/lib/libopen-pal.so.0(opal_crs_base_select+0x7e) [0x7fcd05d7159e] [server:24496] [ 3] /usr/lib/libopen-pal.so.0(opal_cr_init+0x303) [0x7fcd05d50293] [server:24496] [ 4] /usr/lib/libopen-pal.so.0(opal_init+0x17b) [0x7fcd05d4fc0b] [server:24496] [ 5] /usr/lib/libopen-rte.so.0(orte_init+0x4f) [0x7fcd05fa1b3f] [server:24496] [ 6] /usr/lib/libmpi.so.0(+0x38374) [0x7fcd06219374] [server:24496] [ 7] /usr/lib/libmpi.so.0(MPI_Init+0x16b) [0x7fcd0623a01b] [server:24496] [ 8] SU2_CFD(main+0x58) [0x4b7768] [server:24496] [ 9] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7fcd049f5ead] [server:24496] [10] SU2_CFD() [0x4b985d] [server:24496] *** End of error message *** Segmentation fault Regards, Ridwan |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[OpenFOAM] could not open file .vtk in paraview | ali_atrian | ParaView | 8 | August 27, 2014 10:31 |
Problem running in parralel | Val | OpenFOAM Running, Solving & CFD | 1 | June 12, 2014 02:47 |
There is a catastropic failure in SU2 3.0.1 | codezy | SU2 | 1 | April 13, 2014 18:42 |
SU2 3.0 build failure | waku2005 | SU2 Installation | 4 | January 24, 2014 12:40 |
Official release of SU2 V3.0 and SU2 Educational V1.0 | fpalacios | SU2 News & Announcements | 2 | January 22, 2014 05:28 |