May I know the command used for running FSI serial&parallel

shivak · September 23, 2016, 08:20

Dear Sir/Madam

May I know the command used for running FSI serial & FSI parallel

I am trying to solve a standard test case and mesh is in .su2 format

Thanks

Siva kumar

LaSerpe · October 4, 2016, 05:48

You may need to use the python script parallel_computation_fsi.py -f "name_of_config.cfg" -n "Nproc"

You may also want to try mpirun -n "Nproc" SU2_CFD "name_of_config.cfg", if it doesn't work try using both mpirun.mpich or mpirun.openmpi cause it may happen that both libraries are installed on your machine and you'll need to specify the one you used to compile the binaries.
Remember that after SU2_CFD computation finishes you'll need to reconstruct the solution by executing SU2_SOL

shivak · October 17, 2016, 05:51

Thanks for your reply. I din't understand...can you please brief how to reconstruct the solution by executing SU2_SOL after finishing SU2_CFD computation for FSI application..

September 23, 2016, 08:20	May I know the command used for running FSI serial&parallel	#1
shivak New Member shiva Join Date: Sep 2016 Posts: 3 Rep Power: 9	Dear Sir/Madam May I know the command used for running FSI serial & FSI parallel I am trying to solve a standard test case and mesh is in .su2 format Thanks Siva kumar

October 4, 2016, 05:48		#2
LaSerpe New Member Giulio Join Date: Apr 2014 Location: Milano Posts: 17 Rep Power: 12	You may need to use the python script parallel_computation_fsi.py -f "name_of_config.cfg" -n "Nproc" You may also want to try mpirun -n "Nproc" SU2_CFD "name_of_config.cfg", if it doesn't work try using both mpirun.mpich or mpirun.openmpi cause it may happen that both libraries are installed on your machine and you'll need to specify the one you used to compile the binaries. Remember that after SU2_CFD computation finishes you'll need to reconstruct the solution by executing SU2_SOL __________________ Giulio Gori Phd candidate, Politecnico di Milano

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BCs in an FSI simulation of a flexble pipe	vivekcfd	OpenFOAM	10	January 8, 2010 04:14
initial file for fsi modeling?	mortazavi	CFX	0	July 21, 2009 02:06
fsi	sun	Siemens	8	January 19, 2009 23:17
how to extend FSI 2D codes to 3D, need advises	abouziar	Main CFD Forum	1	May 30, 2008 04:08
Could you suggest some Useful FSI textbook?	BI CHANG	CFX	0	January 14, 2006 14:31

October 17, 2016, 05:51		#3
shivak New Member shiva Join Date: Sep 2016 Posts: 3 Rep Power: 9	Thanks for your reply. I din't understand...can you please brief how to reconstruct the solution by executing SU2_SOL after finishing SU2_CFD computation for FSI application..