|
[Sponsors] |
February 12, 2020, 08:58 |
Nacelle Boundary Conditions
|
#1 |
New Member
Rumed İmrak
Join Date: Dec 2019
Posts: 2
Rep Power: 0 |
Hey everyone,
I am trying to simulate an aircraft geometry in farfield with engine fan face and nozzle boundary conditions. The problem is that I can not be sure that I can give an additional inlet and outlet boundary conditions additional to MARKER_FAR. PS: I do not want to simulate inside of engine. I have inlet and outlet values for pressure and tempereture. If you have any experience or suggestion according to topic I would be happy to read. Thanks! |
|
Tags |
inlet, nacelle, outlet, riemann, su2 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Error - Solar absorber - Solar Thermal Radiation | MichaelK | CFX | 12 | September 1, 2016 05:15 |
Basic Nozzle-Expander Design | karmavatar | CFX | 20 | March 20, 2016 08:44 |
Problem in setting Boundary Condition | Madhatter92 | CFX | 12 | January 12, 2016 04:39 |
Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 06:28 |
Low Mixing time Problem | Mavier | CFX | 5 | April 29, 2013 00:00 |