Threads Tagged with regions

Threads Tagged with regions
	Thread / Thread Starter	Last Post	Replies	Views	Forum
	Specifying fluid and solid regions in CHT simulation Amin_	April 3, 2023 17:49 by Amin_	2	393	CONVERGE
	[snappyHexMesh] snappyHexMesh makes too many patches from STL? dbazz	July 13, 2022 07:54 by cgoessni	4	649	OpenFOAM Meshing & Mesh Conversion
	Explanation of sinusoidal heat source code on fvOptions letoppina	June 24, 2022 04:09 by überschwupper	3	429	OpenFOAM Programming & Development
	Pipe Flow with Multiple Regions for Computer Cluster wcj1n18	July 8, 2021 05:41 by wcj1n18	4	593	STAR-CCM+
	Solve a single equation on 2 meshes? gionni	June 1, 2021 12:13 by clapointe	1	361	OpenFOAM Programming & Development
	Mapping Two Solids to Another Enternald	January 18, 2021 10:05 by Enternald	0	375	OpenFOAM Running, Solving & CFD
	Periodic Boundary Conditions tambeshakunt	April 3, 2020 09:47 by tambeshakunt	6	1,156	STAR-CCM+
	Problem with tangential and flat surfaces in surfaceAutoPatch and surfaceFeatures superkelle	January 26, 2020 13:17 by superkelle	0	743	Mesh Generation & Pre-Processing
	Adding turbulence intensity source in separate region Haeussti6	September 11, 2019 09:27 by bluebase	5	1,467	STAR-CCM+
	"Copy" element of a PtrList into another ListPtr frobaux	June 4, 2019 03:57 by frobaux	2	745	OpenFOAM Programming & Development
	NO_CONTROL, problem when solving the interFoam equations inside a single region frobaux	May 24, 2019 08:35 by frobaux	2	846	OpenFOAM Programming & Development
	controlDict dynamic functions for chtMultiRegionFoam Mhmnabil	October 25, 2017 14:22 by Mhmnabil	0	837	OpenFOAM Running, Solving & CFD
	Specifying Regions in Coupled Fluid-Structural System tlewis3348	October 17, 2017 08:29 by tlewis3348	0	982	CFX
	[blockMesh] Multiple Regions not Connected by Any Face lcj66	September 29, 2017 14:30 by HJM	2	4,449	OpenFOAM Meshing & Mesh Conversion
	Multiple setFields regions marcociccio	November 13, 2016 05:53 by Aaron liu	2	6,437	OpenFOAM
	[mesh manipulation] erging of two regions foamaof	August 18, 2016 03:11 by Antimony	5	1,971	OpenFOAM Meshing & Mesh Conversion
	[snappyHexMesh] Is it possible to set flow to laminar with porousSimpleFoam solver? Caio Martins	May 17, 2016 14:12 by Caio Martins	3	1,036	OpenFOAM Meshing & Mesh Conversion
	Setting regions in Boundary Conition ICEM Hossein_k	May 3, 2016 04:29 by Hossein_k	0	885	CFX
	Initialising VOF model Ste	October 14, 2015 06:45 by rixsonkv	10	4,757	STAR-CCM+
	[mesh manipulation] Create patches from a very complex geometry CoSponge	October 9, 2015 12:32 by ninoleum	4	2,108	OpenFOAM Meshing & Mesh Conversion
	[mesh manipulation] Create patches from a very complex geometry CoSponge	June 9, 2015 08:51 by Alex Lee	5	1,865	OpenFOAM Meshing & Mesh Conversion
	[Commercial meshers] Import of Multi-Region Mesh from Gambit with non-conformal interfaces sebonator	June 25, 2014 11:09 by Mojtaba.a	18	8,426	OpenFOAM Meshing & Mesh Conversion
	Boundary/Region Definition Richy	July 10, 2013 08:02 by Richy	1	1,583	STAR-CCM+
	postprocessing with sample in a cyclic case and multiregion fail sebware	September 27, 2012 04:13 by sebware	0	1,851	OpenFOAM Pre-Processing
	Field functions for a specific Region TrII4d	March 15, 2012 06:12 by TrII4d	4	1,929	STAR-CCM+

All times are GMT -4. The time now is 03:39.