How to plot velocity and Mach contour on a blade surface in spanwise direction?

Saima · April 21, 2014, 11:23

Hello Guys,

I am doing flow analysis of a blade in CFX and wanted to plot Mach contour and velocity profile on blade surface in span wise direction.

Guide me how to do that in tech plot?

Regards,

scott_rumage · April 22, 2014, 10:59

Here is a link to a nice step by step tutorial on Tecplot’s web-site that may provide the answer to your question: http://download.tecplot.com/360/tutorials/external-flow/index.html . The tutorial does a nice job of showing the Tecplot 360 user paradigm using a specific example of flow over a wing.
BTW – the video does show an older Tecplot 360 interface, but the steps are basically the same for recent versions as well.

April 21, 2014, 11:23	How to plot velocity and Mach contour on a blade surface in spanwise direction?	#1
Saima Senior Member Saima Join Date: Apr 2009 Location: Canada Posts: 185 Rep Power: 16	Hello Guys, I am doing flow analysis of a blade in CFX and wanted to plot Mach contour and velocity profile on blade surface in span wise direction. Guide me how to do that in tech plot? Regards, __________________ Best Redards, Saima

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mach Contour on water vapor compressible flow	Tony	FLUENT	4	July 15, 2010 11:20
non-dimensional analysis in Fluent	Endee	FLUENT	8	September 7, 2005 16:16

April 22, 2014, 10:59		#2
scott_rumage Senior Member Scott Rumage Join Date: May 2009 Location: Seattle, WA Posts: 152 Rep Power: 16	Here is a link to a nice step by step tutorial on Tecplot’s web-site that may provide the answer to your question: http://download.tecplot.com/360/tutorials/external-flow/index.html . The tutorial does a nice job of showing the Tecplot 360 user paradigm using a specific example of flow over a wing. BTW – the video does show an older Tecplot 360 interface, but the steps are basically the same for recent versions as well.